20050401
•You do not need to open a folder if you want to create the new file in the Storage
Memory or SD card root directory.
•For information about creating a new folder, see “Creating a Folder in Storage
Memory or on an SD Card” (page 12-7-5).
3. Press 2 (NEW).
•This displays a dialog box for inputting a file name.
4. Enter up to eight characters for the eActivity file
name, and then press w.
•This displays a blank workspace screen.
•The following are the characters you can use in a file name:
A through Z, {, }, ’, ~, 0 through 9
u To open a file
1. While the file list screen is displayed, use the 6 function key to select the memory
area (Storage Memory or SD card) that contains the file you want to open.
2. If the file you want to open is in a folder, use f and c to highlight the folder, and
then press 1(OPEN) or w.
3. Use f and c to highlight the file you want to open, and then press 1(OPEN) or
w*
1
.
•This will open the file.
10-2-2
Working with eActivity Files
*
1
If a memory error occurs in step 3, delete
capture memory contents and clipboard data,
or try moving the data to your computer’s hard
disk or an SD card.
Cursor
To Next Page
Loading...
