■Number of input characters
This unit features a 127-step area for calculation execution.
One function comprises one step. Each press of numeric or B, B, □ and B
keys comprise one step. Though such operations as S ® require two key
operations, they actually comprise only one function and, therefore, only one step.
These steps can be confirmed using the cursor. With each press of the © or ©
key the cursor is moved one step.
Input characters are limited to 127-steps. Usually the cursor is represented by
a blinking “ ” , but once the 121st step is reached the cursor changes to a blink
ing If the appears during a calculation, the calculation should be divided
at some point and performed in two parts.
*When numeric values or calculation commands are input, they appear on the dis
play window from the left. Calculational results, however, are displayed from the
right
- 3 5 -
To Next Page
Loading...
