Need help?Do you have a question about the Casio FZ-1 and is the answer not in the manual?
General| Type | Digital Sampling Synthesizer |
|---|---|
| Polyphony | 16 voices |
| Sampling Resolution | 16-bit |
| Envelopes | ADSR |
| Storage | 3.5" Floppy Disk Drive |
| MIDI | In, Out, Thru |
| Display | LCD |
| Year Released | 1987 |
| Waveforms | Sampled, PCM |
| Sampling Rate | 36 kHz |
| Memory | 512KB (expandable with RAM cards) |
| Filter | Digital filter |
| LFOs | 1 LFO |
| Effects | Chorus |
| Keyboard | 61 keys |
| Outputs | Stereo output, headphone output |
| Inputs | Stereo (L/R) sampling inputs |
Details the functionality of cursor, enter, and escape keys for navigation.
Explains how to use value sliders and keys for inputting parameters.
Covers the fundamental operations and setup of the FZ-1.
Explains how to select the Play Mode on the FZ-1.
Details the procedure for loading data from a floppy disk.
Guides on setting the bank number for voice selection.
Covers the process of capturing and defining sounds.
Explains methods for creating voices using synthesized waveforms.
Details combining two voices to create a new sound.
Describes blending two voices at a cross point.
Covers creating reversed voices via sampling or synthesis.
Alters the name and number of voices created using Source Select.
Explains editing sound parameters for created voices.
Specifies the name and number of a bank to be created.
Assigns voices to a bank according to create bank parameters.
To Next Page
