EN-43
Message Description Required Action
A problem occurred while
importing <file name>.
Note that import of a file
created on another model is
not supported.
Some problem occurred while
importing the file.
Make sure that the file was
created using a calculator with
the same model name as this
calculator.
A Key-Log file cannot be
created or opened while Key-
Log data is being played back
or recorded.
Stop playback or recording
and try again.
You are trying to create a
new Key-Log file or open an
existing Key-Log file while Key-
Log data is being played back
or recorded on the calculator.
Stop playback or recording and
try again.
File Extension Error The file you selected has an
invalid file name extension.
Make sure that the extension
of the file you are selecting is
bmp or jpg.
<path> Invalid Extension The file path you selected has
an invalid file name extension.
Make sure that the extension
of the file path you are
selecting is bmp or jpg.
A problem occurred while
accessing the registry.
Check to make sure that the
emulator is installed correctly.
Some problem occurred during
registry access.
Re-installation of the emulator
is recommended.
A system error has occurred.
Exit the emulator and restart
it. If this does not correct the
problem, it could mean that
the emulator file is damaged.
Reinstall the emulator.
A system error occurred. Re-installation of the emulator
is recommended.
Invalid File Name You specified an invalid file
name.
Make sure that you are
specifying the file name
correctly.
Invalid Folder Name You specified an invalid folder
name.
Make sure that you are
specifying the folder name
correctly.
Too Many Files Selected The number of files you
selected exceeds the allowable
limit.
Reduce the number of selected
files.
This data was created by a
different model or different
version. Because of this, some
key names may be wrong.
Though the Key-Log will play
back, some operations may
not be performed correctly.
You are attempting to open
a Key-Log file (g1k) whose
version is older than that of
the software you are currently
running. Note that operations
may not match the operations
in the Key-Log file.
—