Need help?Do you have a question about the Casio GW-9400-1 and is the answer not in the manual?
General| Model | GW-9400-1 |
|---|---|
| Type | Digital |
| Water Resistance | 200 meters |
| Shock Resistance | Yes |
| Power Supply | Solar |
| Atomic Timekeeping | Yes |
| Stopwatch | Yes |
| Countdown Timer | Yes |
| Alarm | 5 daily alarms |
| LED Backlight | Yes |
| Case Material | Resin |
| Band Material | Resin |
| Weight | 93 g |
| Series | G-Shock |
| Display | LCD |
| Sensor Feature | Altimeter, Barometer, Compass |
| Radio Frequency | 60 kHz |
Illustrates the layout and segments of the Liquid Crystal Display.
Identifies and describes key terminals and components for inspection.
Describes how to open the watch to access the battery and display status.
Details the procedure for resetting the module after battery replacement.
Outlines the default settings applied to various watch functions after an AC reset.
Step-by-step guide on safely detaching the watch module from its case.
Instructions for detaching the sensor component from the watch assembly.
Guide on correctly reassembling the sensor component into the watch.
Details the process of installing the LED and specific spring/coil components.
Procedure to measure the module's electrical current draw.
Steps to verify the module's timekeeping accuracy using external tools.
How to test all segments of the Liquid Crystal Display.
Guide on setting the primary city for timekeeping and calibration signals.
Verifies the contact between the solar cell and PCB assembly.
Procedure for testing the functionality of the watch's tilt sensor.
How to perform tests for receiving time calibration radio signals.
To Next Page