Casio PRO TREK PRG-340 User Manual

●
Setting the Time/Date
Use the procedure below to change the time
and date settings.
Important!
●
Configure the Home City setting before
changing the current time and date
settings.
l
Setting a Home City
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Use (D) to display the setting you want to
change.
●
Each press of (D) cycles through
settings in the sequence shown below.
Summer time
Home City
Minutes
Hours
Seconds
Day
Month
Ye a r
12/24-hour timekeeping
Changing Units
Illumination duration
Operation tone enable/disable
Power Saving
4. Configure the date and time settings.
●
While the seconds are flashing,
pressing (A) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
●
For all the other settings, use (A) and (C)
to change the flashing setting.
Holding down (A) or (C) scrolls through
settings at high speed.
5. Repeat steps 3 and 4 to select time and
date settings.
6. Press (E) twice to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3513
11

Casio PRO TREK PRG-340 Specifications

General

Brand	Casio
Model	PRO TREK PRG-340
Category	Watch
Solar Powered	Yes
Triple Sensor	Yes
Barometer	Yes
Altimeter	Yes
Compass	Yes
Thermometer	Yes
Band Material	Resin
Sensor Feature	Digital Compass, Altimeter, Barometer, Thermometer
Glass	Mineral Glass
World Time	Yes
Timer	Yes
Light	LED backlight
Calendar	Full auto-calendar
Mute Feature	Yes
Accuracy	±15 seconds per month
Display	Digital
Case and Bezel Material	Resin
Power Supply	Solar powered
Alarm	5 daily alarms
Other Features	Low-temperature resistance (-10°C/14°F)
Water Resistance	100 meters