80
Using the Quick-Memo Drawing Tools
The following describes the functions of the Quick-Memo Drawing tools when
inputting Quick-Memo data.
Tap a drawing tool with the stylus to select it. The currently selected drawing tool
is highlighted on the toolbar. Tapping some of the drawing tools also cycles through
a number of optional settings.
12 34 5
6
Important!
A diagonal line may appear jagged on the display, even in the Quick-Memo list
(page 82).
Pencil Tool
• Tap this tool to cycle through line thickness in the sequence:
medium
fi thick fi thin fi medium , etc.
• Dragging the stylus on the screen while this tool is selected draws a line.
• Note that you can control the type of line produced by the pencil tool
with the line tool, described below.
Eraser Tool
• Tap this tool to cycle through eraser thickness in the sequence:
medium
fi thick fi thin fi medium , etc.
• Dragging the stylus on the screen while this tool is selected erases
anything along the line.
• Note that you can control the type of path produced by the eraser tool
with the line tool, described below.
1 Pencil
2 Eraser
3 Line
4 Color
5 Undo
6 Selected tool
To Next Page
Loading...
