Casio PX-S7000 - Page 9

C
MA2204-A Printed in China
To play with two layered tones
2
(LAYER)
3
Select the tone you want to layer.
Selecting and Playing a Tone
To change the keyboard’s upper-range
and low-range tones
2
(SPLIT)
3
Select the tone for the lower range of the
keyboard.
Selecting and Playing a Tone
Playing with a Different Sound
1
Select the “01 Standard” F button set. F Button Menu
Listening to Demo Play
1
Select the “01 Standard” F button set.
F Button Menu
2
(DEMO)
3
Start the demo performance.
●
Each touch of the
a
button toggles
between pausing and resuming the demo
performance.
4
Exit DEMO mode.
Sounding the Metronome
1
While holding down the FUNCTION button, touch the
a
button.
The metronome starts.
●
Stop the metronome in the same manner.
●
When the
“
01 Standard
”
F button set is selected, touch F2 (METRO) to set the tempo and the Guide
Type for the metronome (normal metronome sound, drum pattern, etc.).
To sound arpeggio automatically (Arpeggiator)
1
Select the F button set “12 Control”.
F Button Menu
2
(ARPEG)
3
Play and hold a chord (or single note) on the
keyboard.
An arpeggio pattern plays.
4
(ARPEG)
Exit the arpeggiator.
Using the Sound Mode
Sound Mode lets you apply two effects to the sound output from this Digital Piano.
Hall Simulator/Reverb
Hall Simulator and Reverb are both type of effects that add reverberation to the sound.
Select from the following types: Preset type for the selected tone, concert hall simulation type, type that
reproduces the reverberation of a specific space.
Surround
A surround effect (an effect that adds breadth to the sound) is applied to the sound output from the built-in
speakers.
1
2
Select “SOUND” and then “SOUND MODE”.
3
Change the settings for each item to one of the options displayed on the screen.
Sound Mode Off: disables both effects
Hall/Rev.: enables Hall Simulator/Reverb only
Surround: enables Surround only
Hall/Rev. + Srnd: enables both effects
Hall/Rev. Type Tone: the initial setting of each tone
Salon - British Stadium: the Hall Simulator options
Room 1 - Stadium: the Reverb options
Surround Type * Type 1: minimum effect depth
Type 2: intermediate effect depth
Type 3: maximum effect depth
* It may become hard to recognize the effect depending on the tone selected or the audio characteristics being
played back.
4
(Press and hold)
Exit settings.
Setting the Piano Position
Choose the acoustics to match the Digital Piano’s positioning in the room.
1
Select the F button set “04 Listening”. F Button Menu
2
(PPOSI)
Select a setting you like in accordance with the Digital Piano’s actual positioning.
Standard: Standard setting when the Digital Piano is on a stand.
Wall: Recommended setting when the back of this Digital Piano is against a wall.
Center: Recommended setting when this Digital Piano is in the center of a room.
Table: Standard setting when the Digital Piano is placed on top of a table.
3
Trace on the ring to select the most appropriate setting for the Digital Piano’s positioning.
4
(Press and hold)
Exit settings.
Using Microphone Effects
You can apply various effects to sound input from the microphone.
1
Select the F button set “05 Song Play”.
F Button Menu
2
(MICFX)
(Press and
hold)
3
Touch the ENTER button to display the
“TYPE” screen.
4
Trace on the ring to select the desired type of
effect, and then touch the EXIT button.
5
When “FX ON/OFF:OFF” is displayed, switch
to ON.
6
(Press and hold)
Exit settings.
Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
You can use the procedure below to adjust the acoustic piano sound characteristics of notes.
●
String Resonance
●
Damper Resonance
●
Open String Resonance
●
Aliquot Resonance
●
Damper Noise
●
Key On Action Noise
●
Key Off Action Noise
1
Select the F button set “09 Favorite Piano”. F Button Menu
2
(ACSIM)
Saving and Recalling Performance Setups (Registration)
This Digital Piano can register a maximum of 96 setups (24 banks x 4 areas) for tones, effects, etc.
Saving a Setup Registration
1
Select the F button set “02 Regist Setting”. F Button Menu
2
(BANK)
3
Trace on the ring to select a bank, then touch
4
(STORE)
5
Select the area to save.
Touch one of them
6
Touch right (YES) on the ring to save the setup.
Recalling a Setup Registration
1
Select the F button set “03 Registration”. F Button Menu
2
Select the area of the setup registration you want to recall.
Touch one of them
●
This recalls the area of the currently
selected bank (01 to 24).
Using the Mixer
You can configure detailed settings for volume, stereo position and how effects are applied for each part.
1
Select the F button set “04 Listening”. F Button Menu
2
(MIXER)
Using the Included Wireless MIDI & audio adaptor
Connecting this adaptor to the Digital Piano enables the following. For more information, refer to the
“User’s Guide” on the CASIO website.
●
Playing sound through the Digital Piano’s speakers from smart devices connected via Bluetooth
●
Connecting with Bluetooth Low Energy MIDI to use the CASIO smart device app
Returning the Digital Piano to Its Factory Default Settings
This function resets all internal content of the system such as data and settings and returns this Digital
Piano to factory default settings.
1
2
Select “SYSTEM” and then “Factory Reset”.
3
Touch right (YES) on the ring to return this Digital Piano to the factory default settings, or touch left
(NO) on the ring to cancel the operation.
Main Specifications
Model: PX-S7000BK/WE/HM
Keyboard: 88-key
Acoustics: Amp output: 8W × 2 + 8W × 2
Speakers: 16cm × 8cm (oval) × 4
Power Supply: AC adaptor (AD-E24250LW), 8 AA-size alkaline batteries or AA-size rechargeable nickel
metal hydride batteries
Power consumption: 24V
=
20W
Dimensions: Piano, Stand and Music Stand: 134.0(W) × 44.9(D) × 90.3(H) cm (52 3/4 × 17 11/16 × 35 9/16 inch)
Weight:
Piano, Stand and Music Stand: Approximately 29.1 kg (64.2 lbs) (Excluding batteries)
Pedal cord : 70 cm (27 9/16 inch)
• Specifications and designs are subject to change without notice.
Declaration of Conformity
Model Number: PX-S7000
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
A labels rating is affixed to the right side of the product.
Recording Your Performance (MIDI Recorder)
1
2
Play something on the keyboard.
Recording begins.
3
End the recording.
4
Play back the recorded performance.
●
The default recording setting is MIDI recorder (which records the performance as MIDI data). You can
also switch to an audio recorder, which records audio data as is and includes audio input from the MIC
IN jack.
●
This Digital Piano enters SONG mode when playing back the recording. SONG mode also enables
playback of MIDI data (SMF, CMF and MRF) and audio data (WAV and MP3) from the Digital Piano’s
memory or USB flash drive.
Specifying the Battery Type
Select the battery type that matches the battery installed in this Digital Piano’s battery case.
1
2
Select “SYSTEM” and then “Battery Type”.
Alkaline: Alkaline battery
Ni-MH: Rechargeable nickel-metal hydride
battery
3
Touch top or bottom on the ring to select the
battery type.
4
(Press and hold)
Exit settings.
●
When using this Digital Piano on battery power, songs or recordings played at high volume may sound
distorted. This is a result of the power supply differences between the AC adaptor and battery power
and is not a malfunction. If sound distortion is a concern, please use the AC adaptor or turn down the
volume.