5
Layout of Com ports on the QT-6000
As you can see from the diagram above there are 6 Com ports
These are used for the following tasks
Com Port 1 = PC / Modem
Com Port 2 = Scanner
Com Port 3 = Remote display
Com Port 4 = My Printer 1
Com Port 5 = My Printer 2
Com Port 6 = My Printer 3
In addition to the Com ports you can also find
Ethernet In-Line connector
Volume control switch
Two drawer connectors
An External Microphone connector
An External Speaker connector
To Next Page
Loading...
