E-109
Useful features
Advanced programmings and registrations
Programming set menu
This program sets the menu number and sub items’ (included in the menu) PLU
number. You can set up to 15 items in a set menu.
Step Operation
1 Turn the Mode switch to PGM position and select [System
Setting] then press F key.
>▪▪▪▪▪>F
2 Enter 3 and press o key to set the register in the
programming mode.
3o
3 Enter 2 -digit set menu number followed by 28. The “28” is
the identication code for setting menu programming. Then
press o key.
1028o
This example is for programming set menu
number 10.
4 If you wish to use allocated at PLU, proceed to step 5. If
you use normal PLU, enter 4- digit PLU number of an item
included in the menu and press
PLU/
S.DEPT
key.
0012
PLU/
S.DEPT
This example is for setting PLU 0012 in the
menu.
5 If you wish to use allocated <at PLU> key, press <Flat
PLU> key. If you use shifted at PLU, press @ and <Flat
PLU> keys.
(@) <Flat PLU>
6 Press F key. If you wish to set another item in the
menu, preform the step 4 or 5. To set another menu, repeat
the steps 3 through 5.
F
7 Press o key to complete the settings.
o
To Next Page
Loading...
Need help?
General
