— 40 —
E040 Issue guest receipt Attempt to register a new transaction
without issuing a guest receipt.
Issue a guest receipt.
E046 REG buffer full Registration buffer full. Finalize the transaction.
E049 CHECK memory full Check tracking index memory full. Finalize and close the check number
currently used.
E050 DETAIL memory full Check tracking detail memory full. Finalize and close the check number
currently used.
E051 CHK/TBL No. is occu-
pied
Attempt to made use <New Check>
to open a new check using a number
that is already used for an existing
check in check tracking memory.
Finalize and close the check that is
currently under the number that you
want to use or use a different check
number.
E053 CHK/TBL No. is not
opened
Attempt made to use <Old Check>
reopen a new check using a number
that is not used for an existing check
in check tracking memory.
Use the correct check number (if you
want to reopen a check that already
exists in check tracking memory) or
use <New Check> to open a new
check.
E075 Negative balance
cannot be finalized
Attempt to finalize a transaction when
balance is less than or equal to zero.
Register item(s) until the balance
becomes positive amount.
E101 PLU maintenance file
full. Press <#2> to exit
Scanning PLU direct maintenance/
batch maintenance file becomes full.
Terminate the maintenance.
E103 PLU Code is not exist.
Input the PLU Code
PLU code is not existed in the file. Enter proper PLU code.
E105 PLU file full Scanning PLU file full Modify the designated item.
E106 Item exists in the PLU
FILE
The designated item has already
existed in the scanning PLU file.
E112 Close the journal
platen arm
The journal platen arm is opened. Close the journal platen arm.
E114 Close the receipt
platen arm
The receipt platen arm is opened. Close the receipt platen arm.
E139 Negative balance is
not allowed
Attempt to register <
–
> or <CPN>
when the balance becomes negative.
Enter proper minus/coupon amount.
E146 Arrangement file full Arrangement file is full. Set the arrangement properly.
E200 Insert RAC RAC is set. Set RAC.
E201 Illegal Format Illegally formatted RAC Format the RAC.
E202 File not found The designated file is not found in the
RAC.
Enter proper file name.
E205 File already exist. Can not write, because designated file
has already been in the RAC.
Check the operation and retry.
Error
code
Message Meaning Action