— 6 —
2. Initialization
Load IPL data
•
When you replace a main PCB with a spare parts, load the IPL data to ECR as the following steps;
1. Required materials
RS232C cross cable which is using CV10
Memory pack RAC-12B
RAC_TOOL software
IPL data file
*Please contact CASIO sales division to get the above materials.
PC with RS232C COM port
Windows 2000 / XP / Vista
2. System configuration
3. Steps to load IPL data
3-1. Write the IPL data to the RAC-12B from the PC. (Make a special RAC for IPL.)
1) Remove power cord of ECR from AC outlet.
2) Connect the ECR (COM1 port) and PC with the RS232C cross cable.
3) Insert RAC-12B in to the ECR.
SE series ECR
RAC-12B
RS232C Cross Cable
PC with RS232C COM port
Windows 2000/XP/Vista
To Next Page
Loading...
