Casio SF-4400 Service Manual & Parts List

— 8 —
*If the password isn't
registered in the SF unit,
display shows X instead
of "1".
5. If the units have another condition, reset as above.
• To change the parameters
1. Use the and — cursor keys to change the selected parameter on the display.
2. Use the and cursor keys to change the high-lighted setting of the currently selected
parameter.
3. Press SET to store them in memory.
5) Set up the slave machine
1. While an initial screen is displayed, press FUNC twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
2. Press 4 to select DATA COMM.
3. Press 2 to select RECEIVE.
6) Set up the customer’s machine.
1. While an initial screen is displayed, press FUNC twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
1* TO SECRET AREA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
SET
2
DATA
RECEIVE OK
TO STOP
PRESS (ESC)
CAPS
CAPS
FUNC FUNC
∇
∇
∇
*If the password isn't
registered in the SF unit,
display shows X instead
of "1".
FUNC FUNC
1* TO SECRET AREA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
CAPS
4
1 SEND
2 RECEIVE
3 SET UP PAR.
CAPS

Casio SF-4400 Specifications

General

Brand	Casio
Model	SF-4400
Category	Calculator
Language	English