— 10 —
5. OPERATION REFERENCE
5-1. RESET OPERATION
The following procedure erases all data stored in the memory of the SF Unit.
Perform the following operation only when you want to delete all data and initialize the settings
of the SF Unit.
Remember-you should always keep copies of important data by writing it down, by transferring
it to a personal computer or other SF Unit.
To reset the SF Unit's memory
1. Switch on power and press the RESET button with a thin, pointed object.
Warning!
The next step deletes all data stored in the SF Unit's memory. Make sure that you really want
to delete the data before you continue!
2. Press Y* to reset the memory and delete all data or N to abort the reset
operation without deleting anything.
* Note that the letter key you press to indicate "yes" depends on the
system language, as noted below.
English: Y Spanish: S German: J
French: O Italian: S
Following the reset operation described above, the Home Time display appears and the SF
Unit setting are initialized as noted below.
Home Time: 12-hour format
JAN/1/1994
AM/12:00 00
Zone: London(LON)
World Time: New York(NYC)
Daily Alarm: 12:00 PM
Menu Mode: Telephone mode
Language: English
ALL DATA
CLEAR!
OK? Y/N
CAPS
RESET
RESET button
To Next Page
Loading...
Need help?
General
