4.Adding / Changing PLU’s
This job will enable you to add & change PLU’s
(NOTE: PLU’s must start from 1 and can go up to 1500)
TURN THE KEY TO PGM POSITION
01. ENTER 2
02. PRESS SUBTOTAL
03. ENTER PLU# (eg 1 -1500)
04. PRESS PLU# Key
05. TYPE Description using keys on keyboard
06. PRESS CASH key
07. REPEAT Steps 5 to 6 as required for sequencial
PLU’s. Steps 3 to 6 for non-sequencial
PLU’s.
08. PRESS SUBTOTAL
To Next Page
Loading...
