Casio TE-2000 - Getting Started: Initial Setup; Set Mode Key to REG

3. Clerk Name Changing
1. TURN Turn key to the PROGRAM position
2. ENTER 2
3. PRESS Subtotal button
4. DISPLAY Should show PGM2
5. ENTER XX07
Where XX stands for the memory number of each clerk.
ie. 0107 Jeannie, 0207 Leanne, 0307 Holly, 0407 Tania
6. PRESS Subtotal button
7. TYPE New clerk name (using keys on the
Keyboard)
8. PRESS CASH (or TOTAL) button
9. REPEAT Steps 7 & 8 as necessary
10. PRESS Subtotal button to finish
11. TURN Key back to REG1