24
Table transfer (014)
This function allows you to transfer from one table to another.
If you program the status bit (1000000) to the function key it will
allow you to add to a check that is already open.
This function can also be used to transfer sub-total balances for
simple hotel specifications
Text Recall (010)
This function allows you to register pre-determined text
Tray Total (074)
This function allows you to get a sub-total of each tray in a canteen
application
Notes
If you want to use clerk interrupt please make sure you have a NB
key on the keyboard.
If you want to use a Slip printer please make sure you have a Slip
print key on the keyboard.
To Next Page
Loading...
