EasyManua.ls Logo

Casio Wave Ceptor WV-200U-1AV User Manual

Casio Wave Ceptor WV-200U-1AV
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation Guide 3139/3456
E-9
x When using the watch outside the areas covered by the time signal transmitters,
you will have to adjust the current time setting manually as required. See
“Timekeeping” (page E-38) for more information about manual time settings.
x The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
E-8
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and
updates its time setting accordingly.
x Supported time calibration signals: Germany
(Mainflingen), England (Anthorn), United States (Fort
Collins), Japan.
x See the information under “Signal Reception
Troubleshooting” (page E-27) if you experience problems
with time calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
x
The first thing you should do after purchasing this
watch is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City” (page E-10).
Home Time
(Hour : Minutes Seconds)
PM indicator DST indicator
Month – Day
Day of week
Year
E-7
CC
Countdown Timer
Mode
Stopwatch Mode Alarm Mode
C
E-6
General Guide
x Press C to change from mode to mode.
x In any mode (except when a setting screen is on the display), press B to illuminate
the display.
CC
Timekeeping Mode World Time Mode
E-5
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-37
To turn the daily alarm and the Hourly Time Signal on and off . . . . . . . . . . . . E-37
To set the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-45
To turn off Auto Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-46
To turn on Auto Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-46
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . .E-47
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To specify your Home City . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-10
To perform manual receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-24
To turn auto receive on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-25
To display the Last Signal screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
To view the time in another city . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-29
To toggle a city code time between Standard Time and
Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-30
To set the countdown start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-31
To use the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-32
To measure times with the stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34
To set the alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-36
E-3
Contents
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-6
Radio-controlled Atomic Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-8
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-29
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-33
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-35
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-38
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-46
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-56
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-66
E-2
About This Manual
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information can
be found in the “Reference” section.
x To ensure that this watch provides you with the years of
service for which it is designed, carefully read and follow
the instructions in this manual, especially the information
under “Operating Precautions” and “User Maintenance”.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of
your purchase, be sure to read this manual carefully.
x Be sure to keep all user documentation handy for future reference.
Caution!
Your watch is shipped with its Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled
while Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
MA1610-EA
© 2016 CASIO COMPUTER CO., LTD.
Question and Answer IconNeed help?

Do you have a question about the Casio Wave Ceptor WV-200U-1AV and is the answer not in the manual?

Casio Wave Ceptor WV-200U-1AV Specifications

General IconGeneral
BrandCasio
ModelWave Ceptor WV-200U-1AV
CategoryWatch
LanguageEnglish

Summary

Getting Acquainted

About This Manual

Procedure Lookup

To specify your Home City

Procedure to select the primary city for watch settings and time calibration.

To perform manual receive

Steps to manually initiate time calibration signal reception.

To turn auto receive on and off

How to enable or disable automatic time calibration signal reception.

To display the Last Signal screen

How to view the date and time of the last successful signal reception.

To view the time in another city

Steps to check the time in different cities using World Time Mode.

To toggle a city code time between Standard Time and Daylight Saving Time

How to switch between DST and standard time for a selected city.

To set the countdown start time

Procedure to configure the duration for the countdown timer.

To use the countdown timer

Instructions on how to operate the countdown timer function.

To measure times with the stopwatch

Guide to using the stopwatch for elapsed time, split times, and finishes.

To set the alarm time

Steps to configure the daily alarm time.

To test the alarm

How to sound the alarm for testing purposes.

To turn the daily alarm and the Hourly Time Signal on and off

Instructions for enabling/disabling the alarm and hourly chime.

To set the time and date

Procedure for manually setting the watch's current time and date.

To change the Daylight Saving Time (summer time) setting

How to adjust the DST setting manually.

To turn off Auto Display

Steps to disable the feature that automatically cycles display contents.

To turn on Auto Display

Steps to enable the feature that automatically cycles display contents.

To turn the button operation tone on and off

How to mute or unmute button press sounds.

General Guide

Radio-controlled Atomic Timekeeping

Current Time Setting

How the watch automatically adjusts time based on calibration signals.

Time Calibration Signal Reception

Auto Receive

Details on the automatic time calibration signal reception.

Manual Receive

Details on manually initiating time calibration signal reception.

Home City Codes and Transmitters

Approximate Reception Ranges

About Auto Receive

Auto Receive Start Times

About the Receiving Indicator

Signal Reception Troubleshooting

Cannot perform manual receive

Solutions for failed manual signal reception attempts.

Time setting is incorrect following signal reception

Reasons and fixes for incorrect time after signal reception.

World Time

Countdown Timer

Stopwatch

Alarm

Alarm Operation

How the alarm and hourly time signal function and can be tested.

Timekeeping

Setting the Time and Date

Daylight Saving Time (DST)

Reference

Auto Display

Feature to automatically cycle digital display contents.

Button Operation Tone

How to enable or disable the sound made when buttons are pressed.

Auto Return Features

How the watch automatically exits certain modes or settings.

Scrolling

How to navigate through data using buttons.

Initial Screens

What is displayed when entering a mode previously used.

12-hour/24-hour Timekeeping Formats

Illumination

Illumination Precautions

Important notes regarding the use of the EL backlight.

Radio-controlled Atomic Timekeeping Precautions

Specifications

Related product manuals