What to do if my Casio WSD-F30 temperature is high and the power turns off?
If your Casio Watch displays a high temperature warning and shuts down, remove it from your wrist and place it in a location away from direct sunlight, where the temperature is between 10°C and 30°C (50°F and 86°F). Allow the watch to cool down. Once it reaches a lower temperature, you will be able to turn it on again.
Why is my Casio WSD-F30 Watch not charging normally?
If your Casio Watch isn't charging normally, try these steps: First, disconnect the charger cable, then turn the watch off and try charging it again. Ensure you're using only the AC adapter and charger cable that came with the watch. If the issue persists, the rechargeable battery may be deteriorating, and it is recommended to request servicing by your original retailer or authorized CASIO service center.
What to do if some problem occurred with my Casio WSD-F30 and power will turn off shortly?
If your Casio Watch indicates that some problem has occurred and the power will turn off shortly, charge it for at least one hour. Then, hold down the power button for about 12 seconds until the display color changes to restart the watch.
What to do if data acquisition from the sensor may have failed in Casio WSD-F30?
If your Casio Watch displays a data acquisition failure message, restart the watch by swiping the watch face from top to bottom, tapping 'D', then tapping 'System', and finally 'Restart'. If the message continues to appear after restarting, request servicing by your original retailer or an authorized CASIO service center.
General| Resolution | 390 x 390 pixels |
|---|---|
| Operating System | Wear OS by Google |
| Charging Method | Magnetic charging terminal |
| Display | 1.2-inch dual layer display; Color TFT LCD and monochrome LCD |
| Water Resistance | 50m |
| Battery Life | Up to 1.5 days (varies with usage) |
| Sensors | Accelerometer, Gyrometer, Pressure sensor |
| Connectivity | Bluetooth, Wi-Fi |
| Weight | 83 grams |
| Case Size | 60.5mm x 53.8mm x 14.9mm |
Important notes for iPhone users regarding app functionality and restrictions.
Details about the dual-layer display for improved readability.
Explains the power management system for extended use of maps and GPS.
Information on smartphone compatibility and general functions.
Details on water resistance and military standard environment resistance.
Explains GPS capabilities for location acquisition and map display without a phone.
Describes the function of the three side buttons for outdoor use.
Guidance on using the watch's compass for accurate bearing readings outdoors.
Explains how the altimeter and barometer work, including factors affecting readings.
Describes the Tide Graph feature and its limitations for navigation.
Lists the items included in the watch package.
Provides a visual guide to the watch's buttons and touch screen.
Details about manual content, usage restrictions, and disclaimers.
Steps to prepare the watch for its initial use, including charging.
Instructions for installing the Wear OS app on Android and iPhone.
Steps to connect the watch to your smartphone for pairing.
Guide to installing the CASIO MOMENT SETTER+ app on Android.
Steps to configure watch settings for optimal outdoor function operation.
Steps to set up location services on watch and smartphone for outdoor features.
Guide to granting necessary permissions for the CASIO MOMENT SETTER+ app.
How to enable the setting to save daily activity records.
How to enable the setting to save daily location information.
Explains the functions of the power, MAP, and TOOL buttons.
Details on how to charge, turn off, and turn on the watch.
Instructions for switching between different watch faces.
How to add frequently used watch faces to a favorites list.
Steps to remove a watch face from the favorites list.
How to start an app and return to the watch face.
Guidance on using various CASIO and Google apps.
Standard functions provided by the Wear OS operating system.
Features that require a smartphone connection to operate.
Introduces how to use CASIO watch faces and apps for outdoor activities.
Describes various built-in CASIO watch faces and their features.
Procedures for correcting altitude and barometric pressure readings.
Refers to common outdoor function settings.
Explains how to record map-related information and track routes.
Details on using MAP/TOOL buttons and icons for app functions.
How to download maps for offline use.
Using revisit marks for location memos and navigation alerts.
Using point navigation and show direction for destination guidance.
Viewing memos, tracking routes, and map display settings.
How to display your route on the map.
Customizing notification conditions for revisit marks.
Exporting route data to a phone using Google Earth.
Using Point Navigation for destination direction and distance.
Step-by-step guide to initiating navigation to a destination.
How to change destination, stop navigation, and handle arrival notifications.
Lists the functions available in the TOOL app (Compass, Altimeter, etc.).
How to change TOOL functions and display modes.
Switching between color and monochrome displays for better readability.
Detailed guide on using the compass, locking direction, and calibration.
Explains altimeter displays, measurement range, and precautions.
Configuration and precautions for accurate altitude readings.
Warnings and limitations for using the altimeter.
How to use the barometer, calibrate it, and its precautions.
Explains the Time and Azimuth screens for sunrise/sunset times.
Details on tide level, fishing time, and port settings.
Explains fish marks based on Moon age and position for fishing success.
Explains how to read fishing time periods based on Moon hour angles.
Shows how Moon age is indicated on the Fishing Time screen.
Shows daily activity status, calories burned, and activity types.
Steps to enable My Graph by changing settings.
How to select the value shown in the center of the My Graph screen.
How to choose which activity types appear on the Activity Graph.
Shows elapsed time, route, and data for outdoor activities.
Managing and exporting activity history data.
Setting target altitude and using Point Navigation within the app.
Configuring MOMENT SETTER notifications for activities.
How to start, stop, and input results for activity measurements.
Automatically saving activity data to Google Calendar and Drive.
How to view exported activity data using Google Calendar/Earth.
Notes on data accuracy and calibration for activity measurements.
Examples of receiving notifications for altitude and sunrise.
Explains menu items like Recent, Activity types, Extras, and Settings.
Step-by-step guide to configuring climbing/trekking notifications.
Records multiple days of activity data as a continual log.
Warnings about map downloads, Wi-Fi/Bluetooth, and app restrictions.
How to input activity plans and manage logging start times.
How to switch displays, pause, extend, plan, and end logging.
How to view history data on the watch and enable auto-save.
Displays time and info on monochrome LCD to save power.
Selectable Outdoor and Daily styles for the display.
How to switch modes, configure settings, and illuminate display.
Adjusting compass visibility and pressure/altitude calibration.
How to access and use the common settings menu.
Lists available setting items and their display screens.
Calibrates the compass for accurate direction indication.
Corrects magnetic north and true north error.
Manually inputting local altitude values to reduce error.
Auto-calibrates altitude using GPS information.
Inputting current barometric pressure from an accurate barometer.
Changes the value displayed in the center of the My Graph screen.
Specifies the Home city for watch faces like World Time.
Selects display styles (Outdoor/Daily) for watch faces.
Specifies the face color for certain watch faces.
Selects the background for monochrome LCD displays.
Displays destination direction icon on compass during navigation.
Adjusts watch time using GPS signals when not synced.
Specifies the port for viewing tide information.
Recalculates TOOL app data based on current location.
Enables daily location history maintenance.
Records activity information like workout time and calories.
Inputting height and weight for My Graph calculations.
Switches between metric and imperial units.
Selects units for calories burned (Cal or kJ).
Sets the side (right/left) where the watch is worn.
Specifies a target altitude for Activity app trekking.
Shows the meaning of colors used for route tracks on maps.
Automatically starts snow activity measurement when operation is detected.
Selects between Google Maps or Mapbox for map display.
Selects map view (geographic, satellite) for Activity and Location Memory apps.
How to download maps for offline use in Activity/Location Memory apps.
How to view and delete downloaded maps.
Selects between Accuracy Priority and Battery Priority for route tracking.
Turns off all MOMENT SETTER notifications at once.
How to restart the watch to resolve operational issues.
Procedure to force shutdown and restart the watch.
Lists error codes and their required actions for troubleshooting.
Lists further error codes and their required actions for troubleshooting.
Accuracy limitations and warnings for the Tide Graph feature.
Accuracy limitations and assumptions for sunrise/sunset calculations.
Explains calculation basis and potential error in moon age display.
Guidelines for maintaining water resistance and safe usage.
Guidance on optimal and problematic locations for GPS signal reception.
Legal restrictions and checks needed before international travel.
Warnings about GPS usage in restricted areas and potential errors.
Awareness of battery level and environment for Wi-Fi operation.
Lists items tested according to the U.S. military standard.
Instructions to remove stickers to prevent rust and skin irritation.
Detailed list of environmental tests conducted according to the standard.
Lists the specific methods and procedures used for testing.
Lists compatible Android and iOS versions for Wear OS.
Notes on watch/adapter warming, battery life, and charging environments.
How to care for the band and signs of wear.
How extreme temperatures affect watch operation and display.
Avoid strong magnetism to prevent watch malfunction.
Avoid contact with chemicals to prevent discoloration or damage.
How to store the watch properly when not in use.
Precautions for resin parts to prevent color transfer or discoloration.
Handle sensors carefully and rinse after saltwater exposure.
How to clean metal parts to prevent rust and discoloration.
Information on viewing angles and pixel characteristics.
General advice on keeping the watch and band clean.
Risks associated with neglecting watch care, especially rust.
How to avoid wear, cuts, and breaks from sweat or high moisture.
Advice for users with sensitive skin to prevent irritation.
Proper disposal and recycling of the lithium-ion battery.
Unpairing the watch from a smartphone before transferring ownership.
Details on display, touch panel, microphone, and vibration.
Information on battery type, charging time, and method.
Specs for Bluetooth, Wi-Fi, RAM, and internal storage.
List of buttons and environment performance standards.
Lists the sensors integrated into the watch.
Auto time correction, time zones, calendar, and summer time.
Information on adding and managing favorite watch faces.
Details on map, route, download, memo, and history screens.
Specs for Compass, Altimeter, Barometer, Tide/Fishing, Sunrise/Sunset, My Graph.
Supported activities and notifications for Activity and MOMENT SETTER apps.
Brightness, battery indicator, and other watch settings.
Specifications for the AC adapter and charger cable.
Size, weight, temperature range, operating time, and accessories.
Details on GPL, LGPL, and other source codes used.
Lists registered trademarks and copyrights for various brands.
Steps to display regulatory information on the watch.
States compliance with FCC rules and provides caution for modifications.
Explains potential interference and mitigation steps for radio communications.
Discusses scientific evidence on low power wireless devices and RF exposure limits.
Notes that the product is subject to U.S. export controls.
Lists the frequency bands and maximum output power for WSD-F30.
To Next Page
