Description
This item is for configuring settings related to the Activity app and the Location
Memory app. It is for downloading a map to watch memory when “Mapbox”
is selected for “Map Type”. If you want to use the map in an area where a
network connection is not available, use this item beforehand in an area
where a network connection is available to download the desired map.
Downloaded Map (AC/MS/LM/EX)
Operation
Tapping this setting displays the map you downloaded.
●
To display another downloaded map, swipe the touch screen from right to
left.
●
To delete the currently displayed map, swipe the touch screen from bottom
to top and then tap “Delete This Map”.
Description
You can use the procedure under “Download Map” to view and delete maps
saved in watch memory.
Route Tracking(Activity) (AC/LM)
Operation
Each tap of this setting item toggles between “Accuracy Priority” and “Battery
Priority”.
Description
This item is for configuring a setting related to Activity app. While “Accuracy
Priority” is selected, the GPS positioning operation and refresh operation are
performed more frequently, and the route tracked on the map is more
accurate. While “Battery Priority” is selected, the accuracy of the route tracked
on the map is reduced somewhat, but battery power is saved.
Except when you want to perform long-term Trekking or Fishing
measurement operations, use “Accuracy Priority” for better speed and
distance calculation accuracy, and more frequent display refreshing.
Important!
●
Note that with Activity app Cycling, Paddle, and Snow measurement
operations, GPS positioning is executed at relatively short intervals even
when “Battery Priority” is selected for this setting. Because of this, battery
power savings are less in this case.
EN-80
To Next Page
Loading...
Need help?
General
