Changing the “Revisit” Mark Notification Setting
Use “Revisit” marks to record a mark and have the watch alert you whenever
you are in the vicinity. Under the watch’s initial default settings, notification is
performed when both of the conditions below are satisfied.
●
You are <<within five kilometers>> of the “Revisit” mark location.
●
<<At least one day>> has passed since you were last <<within one
kilometer>> of the “Revisit” mark location.
The parts of the above conditions enclosed in double angle brackets (<< >>)
can be specified by you. You can also disable notifications, if you want. You
can use the steps below to configure settings.
1.
While the map is displayed, swipe the touch screen from
bottom to top. On the menu that appears, tap “Settings”.
2.
Scroll the setting menu downwards. When “Revisit” is
displayed, tap it.
3.
On the screen that appears, configure the required
settings.
●
Perform the steps below to modify notification conditions.
1.
If the “Notifications” setting is “OFF”, tap to change it to “ON”.
2.
Tap “Region”. On the list that appears, tap the distance you want to
specify.
3.
Tap “Notification Control”. On the list that appears, tap the interval you
want to specify.
●
To disable notification, tap “Notifications” to change its setting to
“OFF”.
EN-28
To Next Page
Loading...
Need help?
General
