Need help?Do you have a question about the CASO DESIGN VC11 and is the answer not in the manual?
Information about the manual's content, purpose, and structure.
Explanation of warning symbols and their significance.
Details the manufacturer's limitations of responsibility.
Information regarding copyright and intellectual property rights.
Defines the specific and proper intended use of the appliance.
Provides essential safety guidelines for operating the device.
Identifies potential hazards like burns, fire, and electrical dangers.
Safety guidelines for the initial setup and first use of the appliance.
Details the contents of the package and inspection upon delivery.
Specifies the intended uses and applications for the device.
Step-by-step instructions for safely unpacking the appliance.
Guidance on environmentally responsible disposal of packaging materials.
Instructions and requirements for setting up the vacuum sealer.
Procedures and safety precautions for connecting the device to power.
General introduction to the operating manual and its purpose.
Details regarding the content, scope, and application of the manual.
Explains the different warning notices used throughout the manual.
Manufacturer's limitations of liability concerning device usage and information.
Information regarding copyright protection of the document.
Defines the intended purpose and specific use cases for the device.
General safety guidelines for the safe handling and operation of the appliance.
Safety notices to avoid burns from hot surfaces.
Safety notices to prevent fire hazards due to improper use.
Safety notices to avoid dangers from electrical shock.
Safety precautions during the initial commissioning of the device.
Details product contents and checks required upon delivery.
Requirements for choosing a suitable location to set up the device.
Provides a comprehensive overview of the device's design and components.
Information found on the device's rating plate.
Step-by-step guide for operating the vacuum sealer system.
Safety precautions to be observed before cleaning the device.
Important safety notices related to troubleshooting and repairs.
Identifies faults, their possible causes, and recommended actions.
Information about the manual's content, purpose, and structure.
Explanation of warning symbols and their significance.
Details the manufacturer's limitations of responsibility.
Information regarding copyright and intellectual property rights.
Defines the specific and proper intended use of the appliance.
Provides essential safety guidelines for operating the device.
Identifies potential hazards like burns, fire, and electrical dangers.
Safety guidelines for the initial setup and first use of the appliance.
Details the contents of the package and inspection upon delivery.
Specifies the intended uses and applications for the device.
Step-by-step instructions for safely unpacking the appliance.
Guidance on environmentally responsible disposal of packaging materials.
Instructions and requirements for setting up the vacuum sealer.
Procedures and safety precautions for connecting the device to power.
General introduction to the operating manual and its purpose.
Details regarding the content, scope, and application of the manual.
Explains the different warning notices used throughout the manual.
Manufacturer's limitations of liability concerning device usage and information.
Information regarding copyright protection of the document.
Defines the intended purpose and specific use cases for the device.
General safety guidelines for the safe handling and operation of the appliance.
Safety notices to avoid burns from hot surfaces.
Safety notices to prevent fire hazards due to improper use.
Safety notices to avoid dangers from electrical shock.
Safety precautions during the initial commissioning of the device.
Details product contents and checks required upon delivery.
Requirements for choosing a suitable location to set up the device.
Provides a comprehensive overview of the device's design and components.
Information found on the device's rating plate.
Step-by-step guide for operating the vacuum sealer system.
Safety precautions to be observed before cleaning the device.
Important safety notices related to troubleshooting and repairs.
Identifies faults, their possible causes, and recommended actions.
General| Type | Vacuum Sealer |
|---|---|
| Model | VC11 |
| Brand | CASO DESIGN |
| Maximum Vacuum | 0.8 bar |
| Sealing Width | 30 cm |
| Sealing Method | Automatic |
| Vacuum Power | 12 L/min |
| Bag Width | Up to 30 cm |
| Material | Plastic |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
To Next Page