Cassida Omni-ID Counterfeit Detector / UV Verier
2.3 Authenticating a bill
After the bill is positioned in the insertion slot, the detector will automatically feed
and scan the bill. If a bill is recognized as authentic, the following will occur:
1. The green PASS light will illuminate
2. The detector will emit a single conrmation beep
3. The bill will be ejected through the insertion slot at the front of the unit.
If the bill is NOT recognized, the following will occur:
1. The red FAIL light will illuminate and ash three times
2. The detector will emit a triple warning beep
3. The bill will be rejected through the insertion slot at the front of the unit
7
To Next Page
Loading...
General