(Table 1, contd)
Valve Lash (inlet) 0.38 mm (0.0150 inch)
Valve Lash (exhaust) 0.76 mm (0.030 inch)
Generator Description
The SR4B brushless generator is used with the
following loads: mixed loads of motors and lights,
SCR-controlled equipment, computer centers,
installations of communications and petroleum
drilling applications. The elimination of the brushes in
the field circuit reduces maintenance. The elimination
of the brushes in the field circuit increases reliability.
The elimination of brushes provides a higher degree
of protection in potentially hazardous atmospheres.
The generator set packages can be utilized for prime
power generation or standby power generation. The
generator set packages can be used in land based
applications or marine applications.
SR4B generators are utilized in three-phase full-
wave excitation and regulation. The generators are
either four pole or six pole design with four, six, ten,
or twelve lead configuration. The generators are
capable of producing electrical power in either 50 Hz
or 60 Hz applications.
20
SEBU7125-13
Product Information Section
Product Description
To Next Page
Loading...