Catler GR 7010 - Standard Grilling Procedures

12
OPERATING YOUR CONTACT GRILL GR 7010
USING YOUR CONTACT GRILL
Put the grill on a at and  rm surface with
easy reach of apower outlet. Make sure that
there is su cient space around the grill to
allow proper air circulation.
Lift the top plate to open the grill.
Insert the power plug into amains socket
and OFF starts  ashing on the display.
Press the grill on / o button to turn the
grill on. According to the type of food
being made, press the appropriate preset
program icon. The temperature will be set
automatically.
If you need to adjust the temperature, press
the + / - buttons repeatedly to set anew
temperature.
Set the lever control on the grill right to
position 1 and lower the top plate. This will
speed up the grill warming up process.
WARNING!
Never heat the grill
if it’scompletely
closed. Otherwise
the grilling surfaces
and the heating
element might be
damaged.
While the grill is being warmed up, the
temperature on the display is  ashing. As
soon as the temperature stops  ashing, the
grill is ready for use.
Put the raw materials to be roasted on the
bottom grill plate and set the level control
on the right to aposition so that the top
plate just slightly touches the raw materials
on the bottom plate when folded down.
Avoid the top plate fully resting on the raw
materials. Otherwise they might be crushed.
This is especially important when cooking
crisp raw materials such as  shes or baking
sandwiches.
If the raw materials need to be turned over,
lift the top plate, turn the raw materials over
and then lower the top plate again.
When the raw material grilling is  nished, lift
the top plate and use awooden, plastic or
silicone tool to remove them from the grill
plate. Remove the juice and fat residues from
the bottom grill plate using apaper wipe if
needed and you can continue cooking.
When the cooking is  nished, press the
power on / o button to turn the grill o
and unplug the power cord from the mains
socket. Allow the grill to cool down properly
before cleaning. Follow the instructions in
the “Care and Cleaning” section.
WARNING!
The grill plates and
metal parts may get
hot during cooking.
There is arisk
of burns. Avoid
contact with heated
parts.