Catler GR 7010 - Troubleshooting Error Messages; Understanding Error Codes

To Next Page

To Previous Page

ERROR MESSAGES

In the following table, you will  nd the error messages you may encounter while using the

appliance, including the solutions. However, if the problems persists, turn the appliance o ,

unplug the power cord from the mains socket and call your Catler authorized service centre.

Error messages Meaning Solution

Er1 The top plate is

inserted incorrectly.

Press EJECT, remove the top plate and insert

it again - for more details, please refer to

“Removing and attaching the grill plates".

Er2 The bottom plate is

inserted incorrectly.

Press EJECT, remove the bottom plate and

insert it again - for more details, please refer to

“Removing and attaching the grill plates".

Er3 The probe is

disconnected.

Plug the probe cord in the socket on the grill

body.

Er4 Unplug the power cord from the mains

socket.

Allow the grill plates to cool down completely.

Make sure that both plates are inserted

correctly.

Unplug the power cord from the mains socket

and turn the grill on.