To Next PageTo Next Page
Need help?Do you have a question about the CatLink Scooper Luxury Pro and is the answer not in the manual?
Verify item completeness against the packing list.
Position the device as per the product structure diagram.
Insert the power adapter into the rear port of the device.
Ensure waste bag is inserted and waste box is correctly positioned.
Position near Wi-Fi, away from interference.
Device performs self-check upon activation, including cabin rotation.
Prevents operation if obstruction is detected during rotation.
Avoids operation when cat is detected nearby.
Stops rotation if movement is detected in the cabin.
Halts rotation if an object over 1.5kg is detected.
Stops rotation to prevent injury from obstructions.
Stops rotation if significant motor resistance occurs.
Steps to initiate and configure the Wi-Fi connection.
Steps to activate and zero the device before setup.
Instructions for downloading the companion application.
Guidance on connecting to a compatible Wi-Fi band.
Procedure for adding the litter box in the CATLINK app.
Steps to prepare the device for network setup.
Using the CATLINK app for device operation.
Steps to resolve network connection failures.
How to confirm the device is successfully connected to Wi-Fi.
Accessing all device features after successful connection.
Remove, seal, and discard waste, then install a new bag.
Address device stops due to radar, weighing, or full waste box.
Resolve issues caused by the anti-pinch safety function.
General| Product Type | Automatic Cat Litter Box |
|---|---|
| Material | ABS Plastic |
| Litter Type | Clumping Litter |
| Power Supply | AC 100-240V, 50/60Hz |
| Suitable for Cats | Cats weighing 3.3 lbs |
| Cleaning Cycle | Automatic |
| Safety Features | Infrared sensors |
| Connectivity | Wi-Fi |
| App Support | Yes |
| App Features | Remote control, cleaning schedule, usage statistics |
| Odor Control | Built-in deodorizer |
| Indicator Lights | Yes, for status alerts |
