(Replace All Cat Litter)
Press and release Mode button to switch
to Empty Mode.
After all the cat litter has fallen into the
Waste Drawer, press and release the
Clean/Pause button again,
the Globe returns to Home position.
Press and release Clean/Pause button, the unit
starts to rotate clockwise.
After the Globe returns to the Home position, lift
out the Trash Liner filled with the waste clump
and throw it away Put on a new Trash Liner,
and then put the Waste Drawer back in place.
Fill the Globe through the opening with clumping litter until it
meets the raised Fill Line when spread flat. Press and release
Mode button to switch to Manu Mode. Press and release
Clean/Pause button to do a clean cycle for paving cat litter.
Tollfree: +1 833 440 2772 Email:support@catlinkcn
10
To Next Page
