Draw. 1
2
F
A
H
C
D
E
B
6
Technical features
Rated voltage 24 V AC
Frequency 50/60 Hz
Power 15 W
Fuse T 2,5 A
Protection Class
Alternating current IEC 417-5032
Earthing (ground) IEC 417-5019
Installation (Draw. 1)
The appliance is to be installed inside the dental unit or inside
a floor box next to the dental unit (020996 and 020998).
In the first case the Mini-Separator instructions are
included in the dental unit manual.
For the installation of the box fitting
the Mini-Separator refer to the
manual "Box for Maxi-Canister/Mini-Separator".
Functioning (Draw. 1)
The aspirated fluid must be filtered through a 0,8 mm
filter and conveyed to the Mini-Separator (Draw. 1, det.
A
)
through a slightly sloping pipe to facilitate its function-
ing. Air comes out from the outlet
(B)
, whereas the
liquid collects on the bottom of the tank.
When the liquid level reaches the two
longest probes
(C)
the draining pump
(D)
conveys the liquid to waste
(E)
.
To Next Page
Loading...