To Next PageTo Next PageWhat to do if my Cavist Wine Cooler does not operate?
If your Cavist Wine Cooler isn't working, first ensure it's properly plugged into a functioning outlet. If it is, check your circuit breaker or fuse box; a tripped breaker or blown fuse could be the culprit. Replace the fuse or reset the breaker if necessary.
Why is my Cavist 224 temperature too warm?
If the temperature inside your Cavist Wine Cooler is too warm, there might be several reasons: * The temperature control might be set too warm. Try turning it to a cooler setting and wait a few hours for the temperature to stabilize. * The door may be opened too often. Try to open the door less frequently. * The door might not be fully closed. Make sure it is completely shut. * The door gasket might not be sealing properly. Check the gasket to ensure it seals well. * The cooler might have been recently disconnected. Allow about 4 hours for it to cool down completely.
How to stop moisture forming inside Cavist Wine Cooler?
If you see moisture forming on the inside walls of your Cavist Wine Cooler, it could be due to a few reasons: * The door might be slightly open, so ensure it's closed properly. * The door might be opened too frequently. Try to open the door less often. * The door seal might not be working correctly, so check the door seal.
What to do if the Cavist Wine Cooler door will not close properly?
If the door of your Cavist Wine Cooler won't close properly, it might be because the cooler isn't on a level surface. Make sure the wine cooler is level. Also, check if the gasket is dirty and clean it if necessary.
Why is my Cavist 224 too cold?
If the temperature inside your Cavist Wine Cooler is too cold, the temperature control might be set too cold. Adjust it to a warmer setting and allow several hours for the temperature to stabilize.
General| Brand | Cavist |
|---|---|
| Model | 224 |
| Category | Wine Cooler |
| Language | English |
