CARE
AND
MAINTENANCE
Cleaning Your Appliance
★ Upon installation of your new appliance, it is recommended that it be
cleaned thoroughly.
★ Turn off the wine cooler first and then unplug the unit from the wall
outlet.
★ Remove all contents.
★ Wash the inside with a damp warm cloth soaked in lukewarm water
and baking soda solution. The solution should be about 2 tablespoons of
baking soda to a quart of water.
★ Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
★ The outside of the wine cooler should be cleaned with mild detergent
and warm water.
★ Dry the interior and exterior with a soft cloth.
★ Dust or anything else blocking the vent may hinder the cooling efficiency
of the appliance. Vacuum the vent if necessary.
Vacation Time
★ Turn off the wine cooler first and then unplug the unit from the wall
outlet.
★ Remove all the contents.
★ Clean the appliance.
★ Leave the door open slightly to avoid possible formation of
condensation, mold, or odors.
★ Short vacations: Leave the wine cooler operating during vacations of
less than three weeks.
★ Long vacations: If the wine cooler will not be used for several months,
remove all content and unplug the power cord. Clean and dry the
interior thoroughly. To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary.
Moving Your Appliance
★ Turn off the wine cooler first and then unplug the unit from the wall
outlet.
★ Remove all the contents.
★ Securely tape down all loose items inside your appliance.
★ Tape the doors shut.
To Next Page
Loading...