Need help?Do you have a question about the Cayin RU6 and is the answer not in the manual?
Supports PCM44.1~384kHz and DSD64/128/256 for USB audio input.
Supports both NOS (Non Over Sampling) and OS (Over Sampling) modes.
Allows volume adjustment via short or long press and settings modification.
Allows volume adjustment via short or long press and settings modification.
Switches screen ON/OFF with short press; enters settings with long press.
Features 3.5mm single-ended and 4.4mm balanced headphone outputs.
Displays volume, gain, sampling mode, and sampling rate.
Select between High (H) and Low (L) gain settings for optimal headphone matching.
Choose between NOS (Non Over Sampling) and OS (Over Sampling) modes.
Set backlight to ON or choose an auto-off delay (10s-60s).
Utilizes a Discrete R-2R DAC circuit for audio processing.
Features a 0.96" OLED display with 128*64 pixels resolution.
Compact physical size of 65*25.4*13.7mm.
Lightweight design weighing 29g.
Provides 125mW@32Ω (3.5mm PO) and 230mW@32Ω (4.4mm PO).
Achieves 0.01% THD+N at 1kHz, RL=32Ω.
Offers a high S/N ratio of 115dB (20~20kHz, A weighted).
Covers a frequency range of 20Hz-20kHz with a ±0.2dB tolerance.
Supports PCM44.1~384kHz and DSD64/128/256 via USB.
General| USB Interface | USB Type-C |
|---|---|
| Headphone Output | 3.5mm single-ended |
| PCM Decoding | up to 384kHz |
| DSD Decoding | DSD64, DSD128 |
| DAC Chip | R-2R Ladder DAC |
To Next Page
