CB2 shelf - Final Assembly and Care Instructions; Install Side Rail Supports and Slats; Cleaning and Maintenance

side rail
support
panel
Fit notched end of 1 side rail support into left and
right side rails as shown. Make sure side rails are
securely supported by side rail support panels.
With assistance of another adult, place
2 slat assemblies onto side and center
rails. Attach slat assembly with 8 pins
as shown.
Assembly is now complete.
6
5
cleaning & care
Clean surfaces with a dry soft cloth. Do not use abrasive cleaners.
shelf KING BED
MadeinIndia -r06 Page 4of4
CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com