CB2 WALNUT - User Manual

Made in Vietnam - r04 Page 1 of 5
walnut LOW DRESSER
hardware
components
tools required
Thank you for purchasing the Walnut Low Dresser.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
1 - top panel 1 - bottom panel 1 - partition1 - back panel
4 - large drawer
sides
(2 right, 2 left)
4 - drawer bottoms 4 - pulls
2 - side panels
(1 right, 1 left)
2 - small drawer
fronts (1 right, 1 left)
2 - large drawer
fronts (1 right, 1 left)
2 - large drawer
backs
2 - small drawer
backs
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
32 - screws 8 - large
bolts
8 - small
bolts
9 - medium
bolts
12 - wood
dowels
9 - flat
washers
9 - spring
washers
6 - cam
screws
6 - cams
4 - legs
1 - center
support
4 - small drawer
sides (2 right, 2 left)

Summary

Product Contents and Tools

Hardware Identification

Lists all hardware components including screws, bolts, dowels, washers, and cams.

Tools Required for Assembly

Specifies the necessary tools for assembly, recommending hand tools over power tools.

Component Identification

Lists all individual furniture components for the dresser, such as panels, sides, and drawers.

Assembly Steps

Prepare Panels and Attach Legs

Assemble partition and side panels with dowels and cams, and attach legs to the bottom panel.

Assemble Main Frame

Connect bottom panel, side panels, and partition using bolts and washers, then insert back panel.

Attach Top Panel

Secure cam screws into the top panel and then attach the top panel to the main assembly.

Assemble Drawers

Assemble small and large drawers by attaching sides to fronts and backs, and inserting bottoms.

Attach Drawer Pulls

Attach pulls to the front of both small and large drawers using bolts.

Insert Drawers and Complete Unit

Position the unit upright and insert assembled drawers into their corresponding glides.

Care and Maintenance

Cleaning Instructions

Clean surfaces with a dry or damp cloth, avoiding abrasive cleaners or furniture wax/polish.

CB2 WALNUT Specifications

General

Brand	CB2
Model	WALNUT
Category	Indoor Furnishing
Language	English