CB2 Facade - User Manual

facade BED - QUEEN
Made in USA - r07 Page 1 of 3
hardware
components
tools required
Thank you for purchasing the Facade Queen Bed.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
2 - side rails
(1 left, 1 right)
13 - slats
1 - center
support
2 - center
support legs
39 - screws 2 - spacers
(We recommend the use of hand tools instead of power tools)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
1 - headboard
1 - footboard

Summary

Facade Bed Assembly Overview

Hardware and Tools

Lists all included hardware, required tools, and bed components for assembly.

Component Identification

Identifies individual parts such as headboard, footboard, side rails, slats, and supports.

Bed Assembly Steps

Attach Side Rails to Headboard

Connect side rails to the headboard brackets, ensuring they lock into position.

Attach Side Rails to Footboard

Connect side rails to the footboard brackets, ensuring they lock into position.

Attach Slats to Center Support

Secure two slats to the center support using screws, avoiding over-tightening.

Attach Center Support Legs

Connect two center support legs to the center support assembly by turning them clockwise.

Final Assembly and Care Instructions

Align and Secure Remaining Slats

Align slats parallel to headboard/footboard and secure with screws, using spacers.

Cleaning and Care Guide

Provides fabric cleaning code S instructions, spot cleaning, and professional cleaning recommendations.

CB2 Facade Specifications

General

Brand	CB2
Model	Facade
Category	Indoor Furnishing
Language	English