To Next PageTo Next Page
Need help?Do you have a question about the CBI CHB and is the answer not in the manual?
Overview of manufacturer's liability and product use.
Defines the fan's design purpose and operational parameters.
Lists prohibited uses and environmental conditions for ATEX fans.
Details fan series, fluid types, and ATEX reference standards.
Specifies which ATEX version series the manual applies to.
Lists compliance standards for ATEX fans.
Explains ATEX fan grouping by safety level and atmosphere type.
Outlines essential requirements for installing and operating ATEX fans.
Specifies allowed ambient temperature, pressure, and humidity.
Lists fluids that CANNOT be treated by the fan.
Describes the information found on the fan's identification plate.
Explains the meaning of codes on ATEX fan labels.
Facsimile of the declaration of conformity to ATEX directives.
Emphasizes this manual supplements other safety requirements.
Lists potential hazards and risk zones associated with fan operation.
General safety measures during installation and operation.
Procedures for verifying the fan before starting operation.
Detailed procedure for measuring impeller-nozzle clearance.
Checks to perform while the fan is in operation.
Essential checks immediately after the initial fan start-up.
Overview of inspection types and their frequency.
Procedures for monitoring and managing fan vibrations.
Steps for checking bearing temperatures.
Methods for measuring the fan's rotational speed.
Procedure for checking the fan's earth connection resistance.
Guidelines for performing visual checks on the fan.
Specific maintenance tasks for ATEX operational integrity.
Breakdown of maintenance tasks by time intervals.
Clarifies responsibilities for documentation and product use.
Manufacturer's disclaimer regarding liability for improper use.
Information on obtaining support and ordering spare parts.
Details on proactive maintenance based on component analysis.
General