CBI K Series User Manual

Caution: Operators must read the manual
and carefully follow the instructions reported
in it. The Manufacturer shall not be liable
for injury caused to people and/or daamge
caused to propery or undergone by the prod-
uct in the event of failure to comply with the
conditions below.
Cod.
Type
Mod.
“TRANSLATION OF THE ORIGINAL INSTRUCTIONS”
M00004AG - ENGLISH
ATEX SUPPLEMENT
to the User and Maintenance Manual
Centrifugal fan
CH - K - SMX - Z - H
Belt transmission
Coupled with
a transmission
joint
Coupled di-
rectly

CBI K Series Specifications

General

Brand	CBI
Model	K Series
Category	Fan
Language	English

Summary

Premise and General Information

General Considerations for ATEX Fans

General information on ATEX fan differences and manual compliance.

Field of Application and Fan Features

Intended Use and Prohibited Applications

Defines fan's purpose and prohibited applications for ATEX fans.

Fan Specifications and ATEX Standards

Covers fan series, specifications, standards, and identification.

ATEX Safety Categories and Declaration

Explains ATEX risk areas, safety levels, and conformity.

Installation Conditions and Precautions

Environmental and Fluid Operating Conditions

Specifies ambient conditions, pressure, humidity, and fluid limitations.

Installation Safety and Preliminary Checks

General safety measures and essential inspections for installation.

Operation and Maintenance

Fan Start-up Procedures and Checks

Covers stationary/running checks and critical air gap measurement.

Routine Maintenance and ATEX Requirements

Details inspections, speed/earth checks, and ATEX specific maintenance.

Safety and Liability

Accident Prevention and Residual Risks

Addresses general safety and lists potential residual risks for ATEX fans.

Manufacturer and Client Obligations

Outlines responsibilities, warranty, and disclaimer information.