CBI CH Series User Manual

Caution: Operators must read the manual
and carefully follow the instructions reported
in it. The Manufacturer shall not be liable
for injury caused to people and/or daamge
caused to propery or undergone by the prod-
uct in the event of failure to comply with the
conditions below.
Cod.
Type
Mod.
“TRANSLATION OF THE ORIGINAL INSTRUCTIONS”
M00004AG - ENGLISH
ATEX SUPPLEMENT
to the User and Maintenance Manual
Centrifugal fan
CH - K - SMX - Z - H
Belt transmission
Coupled with
a transmission
joint
Coupled di-
rectly

CBI CH Series Specifications

General

Category	Fan
Model	CH Series
Type	Ceiling Fan
Mounting	Ceiling
Voltage	120V

Summary

Field of application

Normally intended use

Details the intended purpose and design of the fan.

Non authorised use

Features

SPECIFICATIONS

Technical specifications and product identification details.

ATEX reference standards

CONDITIONS OF INSTALLATION AND USE

Environmental conditions

Characteristics of the treated fluid

Lists fluids that cannot be treated by the fan and temperature limits.

Product Identification

ATEX products code reading key

Provides a key to understanding the ATEX marking codes on the fans.

Accident prevention

General safety information and residual risks

Covers general safety advice and lists potential residual risks for ATEX fans.

Installation

Installation precautions and method

Covers general precautions, installation methods, and tool safety.

Preliminary checks and inspections

Start-up

Stationary checks

Procedures for checking the fan while it is not running, including air gap measurement.

Running checks and first start-up

Maintenance - Inspections

Vibration control

Bearing temperature control

Maintenance - Measurements

Rotary speed and earth resistance measurement

ATEX Maintenance Requirements

SCHEDULED MAINTENANCE