To Next PageTo Next Page
Need help?Do you have a question about the CBS 2301 and is the answer not in the manual?
Details warranty coverage, liabilities, and exclusions for cryogenic equipment.
Recommends Independent Temperature Alarms and Remote Auto Dialers for continuous monitoring.
Advises splitting samples across freezers and maintaining daily logs for tracking.
Details procedures for power loss, alarms, and low liquid nitrogen levels.
Addresses the need for backup alarms and the function of remote alarm connections.
Explains the purpose and use of an Auto Dialer for remote alarms.
Details electrical, physical hazards, and risks from liquid nitrogen exposure like asphyxiation and cold burns.
Lists essential PPE for handling liquid nitrogen safely.
Provides first aid steps for inhalation and skin/eye contact with cryogenic materials.
Explains the fundamental design differences between S Series and V Series vessels.
Lists operating environmental conditions and initial setup procedures.
Describes the automatic fill sequence based on liquid level set points.
Identifies and describes the function of each control on the front panel.
Details the function and connection for each port on the controller's back panel.
Details the function and connection for each port on the Series 5000 back panel.
Provides step-by-step instructions for manually filling the V Series Isothermal Storage Unit.
Explains Sequential and Simultaneous modes for controller linking and filling.
Covers features like Fill Timer, temperature display, data outputs, logging, and the optional Overflow Sensor.
Provides wiring diagrams and connection details for remote alarms.
Lists key parameters like cooling medium, pressure, voltage, amperage, and unit specifications.
Explains operational modes (Standard, Program) and lists available displays.
Details possible alarm conditions and the hierarchy of programming menus.
Illustrates sample display windows for normal operation and during filling.
General