1
1
3
5
2
4
6
Fill the water tank with ltered/bottled water.
The beverage buttons and alarm indicator light will blink
simultaneously.
Plug into outlet then switch on.
Place an ample container under the dispensing spout.
If required, empty water from used capsule container. Your machine
is now ready for use.
Rinsing machine before rst use
Press the long espresso button. Wait for the machine to complete
a rinse cycle. During this cycle, the alarm indicator light will
blink. Repeat this step until water is dispensed from the beverage
dispensing spout and the alarm indicator light stops blinking. The 3
beverage buttons will blink to conrm end of a rinse cycle.
Warning! Use only ltered/
bottled water in this applian-
ce! Do not put any other liquid or
food in the water tank, except as
instructed in the descaling section of
this instruction book.
To Next Page
Loading...
