8
2
Preparing your beverage
A frozen or extremely cold CBTL™ machine will not operate eciently when
exposed to temperature below freezing. Allow at least 2 hours to reach room
temperature before brewing.
1
2
5 6
3 4
Raise the lever to open the capsule compartment.
Insert the capsule, pressing it gently into place.
Close the lever rmly.
Place a cup or mug under the beverage dispensing spout (see section 6).
Warning! Before you start brewing,
make sure the capsule container is
not full.
Fill the water tank with ltered/bottled water. Turn the appliance on. The beverage buttons will blink simultaneously to indicate that the
machine is warming up. When the buttons remain steadily lit, the
machine is ready for use.
To Next Page
Loading...
