CCV Mobile A920 - SECpos Menu; Functions; Locks; Software Updates

SECpos menu
Software updates:
You can start special functions by using SECpos EVO menu.
Functions as:
Diagnosis | Configuration diagnosis | EMV diagnosis
If there is a payment lock (app “SECpos EVO”) – you can unlock by pressing the unlock button or
starting the needed function.
Locks can be:
- Day-end closure lock (unlock › start reconciliation with closure/day-end closure)
- Initialisation lock (unlock › start initialisation)
- Diagnosis lock (unlock › start diagnosis)
- Startup lock/out of order lock (solution › start “app2pay” startup process)
Software updates (Android/ apps) for CCV Mobile A920 are done via CCVStore. And a configuration
change or reading logs is done via TMS.
1. Software updates › automatically via CCVStore
2. Configuration change › via CCV TMS
If payment app SECpos EVO has been updated the terminal automatically contacts TMS to update
the configuration. Further the terminal contacts TMS with a hearbeatcall every week (configurable,
default once a week).
Start SECpos EVO menu:
- Start “SECpos EVO” app
- Press menu button
- Enter menu PIN (example 000000)
- Select function
Example:
- Diagnosis lock
- Solution › press unlock button
The unlock button automatically starts the
needed function.
11
Declaration of
Conformity
Specifications
Hereby declares CCV Deutschland GmbH the accordance of the radio equipment CCV Mobile A920 and its
power supply to the directive 2014/53/EU.
The complete texts of the EU declarations of conformity are available on following internet address:
https://www.ccv.eu/de/partner-integratoren-netzbetreiber/androidbasiertebe-
zahlloesungen/ccv-mobile-a920/
RAM –
2 GB RAM, 8 GB Flash
(expendable up to 32 GB by micro SD)
Operating system – PayDroid powered by
Android (start with Android 7.1.2)
Processor – Cortex A7 Quad Core 1000 MHz,
Cortex M4 Security CPU
Keypad – Full touch display, 1x on/off button,
2x shortcuts
Display – 5” colour display, 720x1280 pixel, capa-
citive touchscreen, integrated signature pad
Battery – Li-Ion battery 5250 mAH, 3,7V
External power supply – Input 100-240V AC,
50/60Hz and Output 5.0V DC, 2.0A
Integrated thermal printer – Paper roll
diameter 40mm
Camera – 0,3 magapixel front camera and
5 megapixel rear camera for reading 1D & 2D codes
Audio – Speaker and microphone
Dimension – (LxWxH) – 175,7 x 78 x 55 mm,
weight 458g
Contactless reader – ISO 14443 A/B, MIFARE,
girocard contactless, Mastercard contactless, Visa
contactless, American Express contactless, Diners
contactless, girogo
Chip card reader – EMV L1&L2
Magnetic stripe reader – 3 stripe magnetic
reader (bidirectional)
Communication/ interfaces – WiFi (2,4 GHz
+ 5 GHz), Bluetooth 4.0, 4G, 1 Micro-USB/OTG,
1 SIM, 2 SAM, 1 Micro SD (up to 32 GB)
Cash register interface – ZVT and O.P.I.
protocol
Environment – Operation temperature -10° -
50°C, storage temperature -20° - 70°C, loading tem-
perature 0° - 50°C, 10% - 93% relative air humidity,
non-condensing
Certifications – compatible with current speci-
fications DK TA7.1/DC-POS2.5, DK TA7.2/DC-POS3.0,
EMV, RoHS, CE, PCI-PTS 5.x, P2PE (on request)