CCV Pad - Safety Notes; Power Supply Safety; Power Disconnection Precautions

28 CCV Pad - First steps
1. Safety notes
Power
• Before you connect the terminal power pack to an electrical outlet, check that
the on/o power switch on the terminal is o. If the terminal does not have
an on/o switch, check that the power cable connector is removed from the
terminals´s power port. Or, when connecting the terminal to a power pack,
always connect the plug of the power pack to an electrical wall outlet rst.
Then connect the power cable to the terminals´s power port. The power pack
is rated as follows: Input Voltage 100 - 240 VAC 50/60 Hz (1,0A max.) and output
voltage 5V DC, 1,0A.
• Do not use the adapter in a high moisture enviroment. Never touch the adapter
when your hands or feet are wet.
• Allow adequate ventilation around the adapter. Avoid locations with restricted
airow.
• Connect the adapter to a proper source. The voltage and grounding
requirements are found on the product case and/or packaging.
• Do not use the adapter if the cord is damaged.
• Do not attempt to service the adapter. There are no serviceable parts inside.
Replace the unit if it is damaged or exposed to excess moisture.
Disconnecting power
• Disconnecting power during a transaction may cause transaction data les
that are not yet stored in terminal memory to be lost. Never remove the battery
pack from the terminal if it is in the process of performing a payment or other
transaction („Please wait…“). If this message appears for a longer period of
time, please contact your network provider.