CDA CW897 - Built-in Installation; Kitchen Unit Integration

Installation And Ventilation
This appliance must never be installed close to heat sources, e.g. heating elements, cookers or in damp places.
• To ensure the appliance is level, you should use the height adjustable feet at the front of the appliance.
• The cooling system at the rear of the appliance must not touch the rear wall.
• The appliance must be installed with adequate ventilation. Ensure that there is clearance above the appliance to
allow air to escape and that there is space between the rear of the appliance and the wall.
The diagram shows the ventilation requirements for your appliance.
Failure to provide adequate ventilation can lead to increased running costs and premature failure and may invalidate the
warranty provided with the appliance.
fig. 3
300
400
40 - 50
300
25
1778
814
45
25
57
837
545
540
= airow