How to fix a CDA Ventilation Hood that does not work?
If your CDA Ventilation Hood isn't working, start by checking the fuse and replace it if it's blown. Next, ensure the power supply is securely connected, as disconnected wires can prevent the appliance from working.
Why is the output of my CDA EXG60BL so low?
If your CDA Ventilation Hood's output seems low, several factors could be at play. First, the current speed setting might be insufficient for the amount of fumes; try increasing it. Second, check that your kitchen has enough ventilation. Third, if your hood has a charcoal filter, it might be blocked and need replacing. Fourth, obstructions in the ducting can reduce output; remove any you find. Finally, make sure the exit flaps on the motor housing can move freely; clear any obstructions.
What to do if my CDA EXG60BL Ventilation Hood stops mid operation?
If your CDA Ventilation Hood suddenly stops during operation, the first thing to check is the power supply to rule out a power outage. Also, inspect the circuit breaker or fuse, as it may have tripped. If so, reset the breaker or replace the fuse.
General| Width | 60 cm |
|---|---|
| Noise Level | 62 dB |
| Control Type | Push button |
| Number of Fan Speeds | 3 |
| Material | Stainless Steel |
| Colour | Black |
| Fluid Dynamic Efficiency Class | E |
| Lighting Efficiency Class | A |
| Grease Filtering Efficiency Class | C |
| Lighting | LED |
| Filter Type | Aluminium Grease Filter |
| Installation | Ducted or Recirculating |
To Next Page
