6 | Instruction Manual
Touch controls
When the appliance is first plugged in,
will briefly show on the
display and then the display will go o. Only the gesture control
sensor will be illuminated.
Touch
to switch the appliance on. Once the appliance is on,
touch to increase the fan speed and to decrease the speed.
the fan speeds start with the lowest at 1 and the highest at 3.
There is a turbo function which can be activated for a maximum
of 5 minutes at a time. When at fan setting 3, touch the
to enter
turbo mode and the display will show
and a dot will flash. After
5 minutes the fan speed will revert to setting 3 and the dot on the
display will disappear.
Lighting
Touch to turn on the bottom lighting. Touch a second time to
turn on the decorative lighting at the top of the appliance. Touch
a third time and all lighting will go out. Alternatively, touch and hold
for 2 seconds and both sets of lights will turn on.
O-Timer
The O-Timer can be used to automatically turn the appliance o
after a specified time. The O-Timer can be set to 5, 10 or 15 min-
utes. Touch to activate the O-Timer at any time. The sensor will
flash and the display will show
.
Now use the
_
and
+
sensors to
select the O-Timer delay:
Display indication Delay time (Min)
15
10
5
To Next Page
Loading...
Need help?
General
