CDA EXG60BL User Manual

Instruction Manual | 11
To remove the grease filter, pull the glass control panel towards
you and the panel will move upwards then pull open the handle on
the grease filter marked with the arrow in Fig. 1. It will release at the
handle side. Then lower the grease filter to remove it completely.
To replace the grease filter, repeat the steps in reverse.
Please note:
Cleaning the grease filters in
the dishwasher may lead to
discolouration. This is normal
and does not constitute a fault
with the appliance.
Fig. 1
Changing the charcoal filter
(re-circulating only)
To ensure best performance
of your extractor, you should
replace the charcoal filters
every four to six months,
depending on use.
To attach a new charcoal filter,
first remove the grease filters
as described above. Then oer
up the charcoal filter to the side
of the motor as shown in Fig.
2 and turn it clockwise until it
locks into place. Repeat with
the other charcoal filter on the
other side of the motor. Then replace the grease filters and return
the glass panel to its previous position.
Fig. 2

CDA EXG60BL Specifications

General

Brand	CDA
Model	EXG60BL
Category	Ventilation Hood
Language	English