CDA FW221 User Manual

Installation
This appliance must never be installed close to heat sources i.e. heating elements, cookers or in damp places
The appliance should be mounted on a piece of wood (for example a section of worktop or kitchen carcass) if a
raised floor is to be fitted, if the kitchen floor is to be tiled after installation, or if the installation height of the
appliance is greater than 850 mm.
Fig. 1 - Dimensions of the appliance.
Fig. 2 - Dimensions for installation in
adjacent units.
Instructions for fitting the refrigerator in
Fig.A-Volume of the under the counter ap-
pliance
Fig.A1-Volume of the under the counter
appliance in the event of adjacent
1
Instructions for fitting the refrigerator in
Fig.A-Volume of the under the counter ap-
pliance
Fig.A1-Volume of the under the counter
appliance in the event of adjacent
1
fig. 1
fig. 2

CDA FW221 Specifications

General

Brand	CDA
Model	FW221
Category	Refrigerator
Language	English