19
Please note:
• The mains cable must only be replaced by a qualified
electrician or service engineer and must be of equivalent
or better rating (i.e. 2.5mm
2
, HO5RR-F).
• This appliance is intended to be connected to the mains
supply with a cable of cross section area 2.5mm
2
. A larger
cable will not fit the terminal connections.
• The marking of the current rating of the fuse or circuit
breaker protecting this appliance should be marked on the
socket outlet.
• Assembly and electrical connection should be carried out
by specialised personnel.
• When installing this product we recommend you seek the
help of another individual.
• Ensure that the brass links are securely fitted. Failure to do
so will prevent the hob from operating correctly.
To Next Page
Loading...
Need help?
General
