EasyManua.ls Logo

CDA hc9620 - Locking the Controls; Unlocking the Controls; Automatic Safety Switch-Off

CDA hc9620
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
To lock the controls:
Touch the key lock control . If all heating zones are switched o
the timer indicator will show “Lo“: If one or more heating zones is
switched on the timer indicator will flash between “Lo” and “--“.
To unlock the controls:
Touch and hold the key lock control for approx. 2 seconds.
The hob will beep and the controls are now unlocked; the ceramic
hob is ready for use.
Warning: If the hob is switched o using the “ON/OFF” control while
the controls are locked, it will be necessary to unlock the hob using
the process above BEFORE the hob is next used.
Over-temperature protection
The ceramic hob is fitted with a sensor to monitor the temperature
inside the hob. When an excessive temperature is recorded, the
ceramic hob will stop operation automatically.
Auto safety switch o
If a heating zone is left switched on and untouched for a period of
time it will automatically switch itself o. The default switch o times
are shown in this table:
Cooking Zone Power
Level
1 2 3 4 5 6 7 8 9
Switch O Time
(Hours)
8 8 8 4 4 4 2 2 2

Related product manuals